Bandsaw Wheels Recovered

Looking for a very affordable way to update & enhance the performance of your bandsaw, without the time consuming job of trying to do it yourself? Woodworkers’ Tool Works is one of the few companies in the country that will apply new tires to your bandsaw wheel for you!

Your bandsaw wheels can be recovered and crowned for $6.00 per inch (wheel diameter) plus shipping. This includes a new tire, installed and ground to the proper crown, along with balancing.

Wheels should be shipped in a suitable container for return (so as to reduce handling or crating fees). Wheels should also be clean and ready for service to eliminate cleaning time. Ship to: Woodworkers Tool Works, N4299 Lien Road, Melrose, WI 54642 USA (800-475-9991)

If you do wish to tackle the job on your own, Woodworkers’ does supply high quality tires in all the diameters and styles that will fit your machine. Click here to purchase tires. (If international – send email to: info@woodworkerstoolworks.com)

Posted in Uncategorized | Tagged , , , , , , , , , | Leave a comment

US Cutting Chain Mortise Official Distributor

Woodworkers’ Tool Works has officially taken over the distribution & repair of all US Cutting Chain operations. This includes all mortise chains, links, sprockets, bars (including custom sized), as well as repair, reconditioning, and sharpening. 800-475-9991 (click below to purchase set)
http://store.woodworkerstoolworks.com/mortise-bar-sprocket-and-chain-set/
#mortise #mortice #uscuttingchain

Posted in Hard to find Tools | Tagged , , , , , , , , , , , , , | Leave a comment

New Pre-Crowned Bandsaw Tires

Bandsaw tires can now be ordered PRE-CROWNED! All tires must be crowned to allow for proper tracking of the blade. Save time by ordering them Pre-Crowned and get your shop back up & running with only minor delay. Available in 14″, 16″ & 20″ for Walker Turner or Jiffy bandsaws.
Click here to view & purchase bandsaw tire.

Posted in Hard to find Tools, Uncategorized | Tagged , , , , , , , , , | Leave a comment

Laser Guide Line Lights for precise cutting!

The Carter Laser Guide Line Laser projects a sharp, precise, highly visible red line for exact cutting, marking or assembly operations. This integrity maintains a consistent 1/8″ wide line even when projected over a considerable distance.Click here to purchase LGL100A or HIGH Powered LGL100HP

Posted in Hard to find Tools | Tagged , , , , , , , , | Leave a comment

Dewalt planer knives

Dewalt #DW734 carbide tipped single edge planer knives now available! Sold by the set with (3) knives per set $245. 12-1/2″ x 7/8″ wide x 1/16″ thick.
Click here to buy now!

Posted in Uncategorized | Leave a comment

Delta Rockwell Jiffy Yates American Bandsaw Tires

Delta Rockwell Jiffy Rubber Bandsaw tires; Yates American; to replace Snap-Lock tires. 20″ tires made to bridge the gap on the rim of the wheel & are a special thickness. Only $84.50 each (sold individually – NOT as a pair) Works for machine model # 28-640 or model # 28-641. Includes 2-part Slow Cure Epoxy kit! (Pre-crowned tires are also available for additional $65 per tire).

Click to buy tire

Or Call: 800-475-9991 Designed to bring the wheel back to the proper operating diameter.

Posted in Hard to find Tools, Uncategorized | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

LRH cutters for Magic Moulder

LRH cutters available in standard & custom profiles! Call now 800-475-9991

Posted in Hard to find Tools | Tagged , , , , , , , , , , , , | Leave a comment

Champion Shaping Saw Head

Champion Shaping Saw Head (only $165) (specify Right or Left Hand). Now you can run inexpensive standard profiles on your table saw using standard shaper knives made by Amana & many others. 800-475-9991

Posted in Hard to find Tools | Tagged , , , , , , , , | Leave a comment

Fluting Head Video

Demonstration of WTW#1 Reeding & Fluting Head (original tool built by Woodworkers’ Tool Works in 1907 & still being produced). Allows precise cutting of spindles into decorative flutes for furniture & stairways. Adjustable to cut any length or any diameter spindle. Demonstrated by craftsman Jim Kreft of Kreft Cabinets, Arlington, MN. Available at 800-475-9991 (purchase or lease packages)
Fluting Head Video

Posted in Consulting, Hard to find Tools, Uncategorized | Tagged , , , , , , , , , , , | Leave a comment

Northfield, Tannewitz, Wright, Shop Fox & more…

Some of the manufacturers we sell & provide parts for. Foster Grinder, Wright, Northfield Machine, US Cutting Chain, Shop Fox, Williams Hussey, Whiteside, Carter, Tannewitz & more….

Posted in Hard to find Tools | Tagged , , , , , , , , , , , , | Leave a comment